15 mm x 35 mm x 11 mm NACHI 7202CDT angular contact ball bearings

Weight:3.39 kg; d:49.21 mm; T min.:-20 °C; Designation of housing:F211-; J:130 mm; C0:29.2 kN; A:43 mm; C:43.55 kN; A1:18 mm; B1:59 mm;

B:55.6 mm; T min.:-20 °C; C0:44.8 kN; N:25mm; H:250 mm; L:150 mm; T max.:200 °C; Designation of housing:FL311-; C:71.5 kN; A1:20 mm;

Maximum tightening torque:360 Nm; e:53 mm; Dw:3.18 mm; Bearing with/without cage:Avec; Characteristic rolling element frequency, BSF:12.87 Hz; G1:32 mm; Inventory:0.0; Lw:25.4 mm; F:38 mm; Brand:NTN;

E:12.5 mm; B1:43 mm; T min.:-20 °C; H1:12 mm; H2:93 mm; d1:52 mm; L:103 mm; G:R1/8"; B:27 mm; J:82.6 mm;

C0:29.2 kN; A1:35 mm; L:222 mm; Designation of housing:PE211N-; Dz:110 mm; G:R1/8"; T max.:100 °C; d:55.56 mm; Recommended tightening torque for set screw:16.8 Nm; s1:27.8 mm;

Min operating temperature, Tmin:-40 °C; Characteristic rolling element frequency, BSF:5.4 Hz; D:125 mm; Radial clearance class:CN; Da max:117 mm; f0:14.5; Brand:SNR; Fatigue limit load, Cu:2 kN; Dynamic load, C:61.9 kN; Max operating temperature, Tmax:120 °C;

A1:12 mm; H2:56 mm; N1:16 mm; d:30 mm; N:22mm; Weight:1.17 kg; N2:37 mm; C:19.5 kN; A:37 mm; L:113 mm;

Retainer Material:Nylon; Flinger Type:Rubberized; Self Aligning:Self Centering; Bearing Duty:Normal Duty; Bearing Series:207 Series; Bearing Inner Ring Material:Steel; Housing Type:Narrow Slot Take-Up; Bearing Locking Device:Setscrew; Shaft Attachment (2):Set Screw; d:1.3750 in;

Harmonized Tariff Code:8482.10.50.68; maximum rpm (grease):10000 rpm; Category:Single Row Ball Bear; Outside Diameter:2.835 Inch | 72 Mill; Mass:0.36 kg; rs min:1.1 mm; B:19 mm; Maximum Capacity / Filling Slot:No; outside diameter:72 mm; Product Group:B00308;

da min:68 mm; Characteristic rolling element frequency, BSF:5.26 Hz; Dynamic load, C:52.5 kN; Max operating temperature, Tmax:110 °C; Mass:0.78 kg; f0:14.3; ra max:1.5 mm; Characteristic cage frequency, FTF:0.41 Hz; Fatigue limit load, Cu:1.64 kN; Characteristic inner ring frequency, BPFI:5.92 Hz;

Weight:0.43 kg; T min.:-20 °C; d:15.88 mm; N:12mm; d1:27.2 mm; A1:11 mm; A:25.5 mm; S:6.5 mm; s1:23.05 mm; C0:4.78 kN;

T min.:-20 °C; S:34 mm; H3:210; B:86 mm; C0:86.5 kN; J:196 mm; A:68 mm; C:122.85 kN; d:80 mm; e:18 mm;

H2:165 mm; Designation of bearing:EX210G2T04; G:M6x1; N:20mm; S:24.6 mm; N1:25 mm; Weight:3.96 kg; H1:22 mm; Recommended tightening torque for set screw:11.5 Nm; A:70 mm;

Weight:0.29 kg; C0:7.88 kN; C:14 kN; N:8,7mm; A1:4 mm; J:76.2 mm; B1:30.9 mm; Recommended tightening torque for set screw:5.5 Nm; L:71 mm; Designation of housing:PFL205-;

C0:11.2 kN; C:19.5 kN; B1:48.3 mm; B:36.4 mm; J:117 mm; A:31 mm; d:30.16 mm; Designation of bearing:EX206-19G2T20; N:12mm; e:18 mm;